Civil Engineering Technical Questions Answers - Ask a Civil Engineer - Recent questions and answers
http://www.aboutcivil.org/answers/qa
Powered by Question2AnswerAnswered: where is the steel bars fixed in beams and columns?
http://www.aboutcivil.org/answers/4509/where-is-the-steel-bars-fixed-in-beams-and-columns?show=5064#a5064
<p>Steel bars, also known as reinforcement bars or rebars, are commonly fixed within beams and columns in reinforced concrete structures. The placement of steel bars in beams and columns helps to enhance their structural strength and durability. Here are some general guidelines for the placement of steel bars:</p><h2>Beams:</h2><h3>1. Bottom Reinforcement:</h3><p>Steel bars are typically placed at the bottom of the beam, parallel to its length. These bars are known as the bottom reinforcement or tension reinforcement.</p><h3>2. Top Reinforcement:</h3><p>In some cases, additional steel bars may be placed at the top of the beam, parallel to its length. These bars are known as the top reinforcement or compression reinforcement.</p><h2>Columns:</h2><h3>1. Vertical Reinforcement:</h3><p>Steel bars are placed vertically within columns to provide strength and resist compressive forces. These bars are known as vertical reinforcement or main bars.</p><h3>2. Lateral Reinforcement:</h3><p>In addition to the vertical reinforcement, steel bars are placed horizontally around the perimeter of the column at regular intervals. These bars are known as lateral reinforcement or ties. They help to improve the column's resistance against lateral forces and prevent buckling.<br><br>It's important to note that the specific placement and spacing of steel bars within beams and columns depend on factors such as structural design, load requirements, and local building codes. Consulting a structural engineer or referring to the appropriate design standards and regulations in your region is essential to ensure proper reinforcement placement.</p>Reinforced Concretehttp://www.aboutcivil.org/answers/4509/where-is-the-steel-bars-fixed-in-beams-and-columns?show=5064#a5064Sun, 09 Jul 2023 04:31:27 +0000Answered: Requirement of good floor
http://www.aboutcivil.org/answers/1210/requirement-of-good-floor?show=5063#a5063
<p><em><strong>Following are the advantages of <a rel="nofollow" href="https://www.aboutcivil.org/Floors.html">floors</a>:</strong></em></p><ol><li>They are hard & Durable.</li><li>Provide a smooth & non absorbent surface.</li><li>They are more fire resistant.</li><li>They provide more sanitary surface as they can be cleaned & washed easily.</li><li>They are economical as they require negligible maintenance cost.</li><li>They can be finished with a pleasing appearance.</li></ol>Civil Engineeringhttp://www.aboutcivil.org/answers/1210/requirement-of-good-floor?show=5063#a5063Sat, 12 Oct 2019 17:25:25 +0000Answered: please tell me the procedure of making bars binding schedule of steel and how i can draw this bars binding schedule ?
http://www.aboutcivil.org/answers/110/please-procedure-making-binding-schedule-binding-schedule?show=5062#a5062
<p>See the article on <a rel="nofollow" href="https://www.aboutcivil.org/bar-bending-schedule">Bar Bending Schedule</a>. There are other details like what softwares to use, how to make bar bending schedule and what is the format / template of BBS.</p>Building Constructionhttp://www.aboutcivil.org/answers/110/please-procedure-making-binding-schedule-binding-schedule?show=5062#a5062Fri, 11 Oct 2019 16:56:54 +0000Answered: Difference between fresh and hardened concrete
http://www.aboutcivil.org/answers/3920/difference-between-fresh-and-hardened-concrete?show=5061#a5061
<p>See detailed answers here:</p><ul><li><a rel="nofollow" href="https://www.aboutcivil.org/Properties-of-concrete-factors-affecting-them.html">Properties of Fresh Concrete</a></li></ul><div><ol class="style168"><li><p><a rel="nofollow" href="https://www.aboutcivil.org/Properties-of-concrete-factors-affecting-them.html#se">Setting</a></p></li><li><p><a rel="nofollow" href="https://www.aboutcivil.org/Properties-of-concrete-factors-affecting-them.html#wo">Workability</a></p></li><li><p><a rel="nofollow" href="https://www.aboutcivil.org/Properties-of-concrete-factors-affecting-them.html#bl">Bleeding and Segregation </a></p><ol type="a" style="list-style-type:lower-alpha"><li><p><a rel="nofollow" href="https://www.aboutcivil.org/Properties-of-concrete-factors-affecting-them.html#bl">Bleeding</a></p></li><li><p><a rel="nofollow" href="https://www.aboutcivil.org/Properties-of-concrete-factors-affecting-them.html#sg">Segregation</a></p></li></ol></li><li><p><a rel="nofollow" href="https://www.aboutcivil.org/Properties-of-concrete-factors-affecting-them.html#hy">Hydration</a></p></li><li><p><a rel="nofollow" href="https://www.aboutcivil.org/Properties-of-concrete-factors-affecting-them.html#ai">Air Entrainment</a></p></li></ol></div><ul><li><p><strong><a rel="nofollow" href="https://www.aboutcivil.org/properties-of-hardened-concrete.html">Properties of Hardened Concrete </a></strong></p></li></ul><div><ol><li><p><a rel="nofollow" href="https://www.aboutcivil.org/properties-of-hardened-concrete.html#st">Strength of concrete </a></p></li><li><p><a rel="nofollow" href="https://www.aboutcivil.org/creep-in-concrete.html">Concrete Creep </a></p></li><li><p><a rel="nofollow" href="https://www.aboutcivil.org/shrinkage-in-concrete.html">Shrinkage </a></p></li><li><p>Modulus Of Elasticity</p></li><li><p>Water tightness (impermeability)</p></li><li><p><a rel="nofollow" href="http://www.enggpedia.com/civil-engineering-encyclopedia/dictionary/engineering-materials/319-rate-of-strength-gain-of-concrete">Rate of Strength gain of Concrete </a></p></li></ol></div>Concrete Technologyhttp://www.aboutcivil.org/answers/3920/difference-between-fresh-and-hardened-concrete?show=5061#a5061Sun, 22 Sep 2019 11:53:37 +0000Which is the best cement ultratech or coromandal king in PPC segment...and most important WHY???
http://www.aboutcivil.org/answers/4653/which-best-cement-ultratech-coromandal-segment-important
Cement qualityEngg. Materialshttp://www.aboutcivil.org/answers/4653/which-best-cement-ultratech-coromandal-segment-importantSun, 04 Aug 2019 04:54:30 +0000How to calculate slope level for two way ramp if the ramp is linear at start,curved at mid and linear at end .
http://www.aboutcivil.org/answers/4529/calculate-slope-level-ramp-ramp-linear-start-curved-linear
How to calculate the slope level for two way ramp if the ramp is linear at the start, curved at mid and linear at the end .My email is nawabzada200@gmail.comSurveying & Levellinghttp://www.aboutcivil.org/answers/4529/calculate-slope-level-ramp-ramp-linear-start-curved-linearWed, 24 Jul 2019 06:22:17 +0000What type of structure can I use to replace a retaining wall
http://www.aboutcivil.org/answers/4506/what-type-of-structure-can-i-use-to-replace-a-retaining-wall
Hello<br />
We have a retaining wall that is compromised. We would like to use fencing or containment material like the type you see on highways that contain far more than we need to contain. <br />
<br />
Can this material be installed at a residential location?<br />
<br />
The wall is about 100 feet long, 2 feet tall and graduates up to 9 feet on the other end.<br />
<br />
Thank youCivil Engineeringhttp://www.aboutcivil.org/answers/4506/what-type-of-structure-can-i-use-to-replace-a-retaining-wallSat, 20 Jul 2019 08:27:54 +0000RCC highway road can sustain what intensity of earthquake before developing major cracks
http://www.aboutcivil.org/answers/4446/highway-sustain-intensity-earthquake-before-developing-cracks
A highway road developed cracks in earthquake with intensity of 3.7 where the epicentre of the earthquake is 100 km away from the place of accident.Concrete Technologyhttp://www.aboutcivil.org/answers/4446/highway-sustain-intensity-earthquake-before-developing-cracksFri, 05 Jul 2019 04:23:12 +0000Pipes embedded in wall
http://www.aboutcivil.org/answers/4411/pipes-embedded-in-wall
ACI 6.3.9 — In solid slabs, piping, unless it is for radiant heating or snow melting, shall be placed between top and bottom reinforcement.<br />
<br />
How about wall? Piping should placing between reinforcement?Reinforced Concretehttp://www.aboutcivil.org/answers/4411/pipes-embedded-in-wallSat, 08 Jun 2019 16:32:41 +0000What are the disadvantages in substituting a beam made of spruce wood for one made of oak wood?
http://www.aboutcivil.org/answers/4393/what-disadvantages-substituting-made-spruce-wood-made-wood
So the construction beams are in need of maintenance, therefore changes will be made in the materials used, oak will be changed to spruce. What are some disadvantages that may occur?Engg. Materialshttp://www.aboutcivil.org/answers/4393/what-disadvantages-substituting-made-spruce-wood-made-woodFri, 31 May 2019 11:42:39 +0000I am doing UG final year project in GeoTech regarding soil liquefaction on QUAKE/W. I am not able to operate on this software properly. If someone can please share a hand. would be much obliged.
http://www.aboutcivil.org/answers/4193/geotech-regarding-liquefaction-software-properly-someone
there are no experts of this software in my university.Civil Engineeringhttp://www.aboutcivil.org/answers/4193/geotech-regarding-liquefaction-software-properly-someoneFri, 24 May 2019 07:32:02 +0000Name and differentiate between three methods of hazards identifications in the work place
http://www.aboutcivil.org/answers/3973/differentiate-between-three-methods-hazards-identifications
Hazards identifications involves the foreseeing potential causes of harm in the workplace to employees., employers and the public members.Civil Engineeringhttp://www.aboutcivil.org/answers/3973/differentiate-between-three-methods-hazards-identificationsMon, 20 May 2019 04:39:07 +0000Why anchorage length is equals to Ld plus 10dia. for beam steel in exterior columns as per Is 13920?
http://www.aboutcivil.org/answers/3971/anchorage-length-equals-10dia-steel-exterior-columns-13920
Detailing as per IS code.<br />
Why anchorage length is equals to Ld plus 10dia. for beam steel in exterior columns as per Is 13920?Reinforced Concretehttp://www.aboutcivil.org/answers/3971/anchorage-length-equals-10dia-steel-exterior-columns-13920Wed, 15 May 2019 10:39:01 +0000A 7-inch non-reinforced concrete pavement is subjected to a wheel load that produces a bending moment of 3,500 lb-in per inch of slab.
http://www.aboutcivil.org/answers/3970/reinforced-concrete-pavement-subjected-produces-bending
A 3-inch hot-mix asphalt (HMA) overlay is placed on the pavement as shown below. The concrete has a modulus of elasticity of 4,000,000 psi and the HMA has a modulus of elasticity of 700,000 psit Assume that there is full bonding between the layers and that the moment remains the same after overlay. The decrease in the maximum tensile stressCivil Engineeringhttp://www.aboutcivil.org/answers/3970/reinforced-concrete-pavement-subjected-produces-bendingThu, 09 May 2019 23:01:59 +0000How to repair corrupted edb files ?
http://www.aboutcivil.org/answers/3969/how-to-repair-corrupted-edb-files
EdbMails EDB to PST utility<br />
Make sure that if you are an exchange server administrator and in look for an exchange recovery tool for your corrupted or inaccessible exchange database then you select the best available tool to do the job for you. This becomes especially critical since the data in exchange database can be of utmost importance and needs to dealt with in an proper fashion to prevent any loss of information.<br />
<br />
After extensive market research and testing, I’ve come to the conclusion that EdbMails EDB to PST utility is the best suited for such situations. The best part is the fact that you don’t require the exchange server service running or the log files in order to carry out recovery process with EdbMails. All the EDB data along with emails, contacts, calendars, task, notes, inbox items etc will be recovered. EdbMails has the unique ability to export EDB mailboxes to PST, EML, MSG and HTML formats without losing any data.<br />
<br />
EdbMails supports Office versions 2013, 2010 2007, 2003 and Exchange server versions 2016/2013/2010/2007/2003<br />
<br />
For more information and download, please visit: <a href="https://www.edbmails.com/" rel="nofollow" target="_blank">https://www.edbmails.com/</a>Urban Town Planninghttp://www.aboutcivil.org/answers/3969/how-to-repair-corrupted-edb-filesTue, 07 May 2019 12:57:03 +0000What would be the best way to solve a railroad issue in the middle of my city?
http://www.aboutcivil.org/answers/3968/what-would-the-best-way-solve-railroad-issue-the-middle-city
Hi. I'm creating a proposal project for my English class. There is a railroad that cuts through the middle of my city and trains block traffic many times a day. I am proposing a type of underpass that goes underground. It's length is about 150 feet. Is this idea feasible? If so, how much would it cost. If possible, can you provide a better alternative to solve this issue? ThanksRailway Engineeringhttp://www.aboutcivil.org/answers/3968/what-would-the-best-way-solve-railroad-issue-the-middle-citySun, 28 Apr 2019 17:00:08 +0000why trusses are not employed for short span
http://www.aboutcivil.org/answers/3965/why-trusses-are-not-employed-for-short-span
Beams are designed for small spans and its uneconomical for larger spans. Hence trusses arches brideges areused. Why dont we use these for short spanStructural Engineeringhttp://www.aboutcivil.org/answers/3965/why-trusses-are-not-employed-for-short-spanMon, 22 Apr 2019 06:14:28 +0000Study of pressure exerted by liquid at rest is termed as
http://www.aboutcivil.org/answers/3954/study-of-pressure-exerted-by-liquid-at-rest-is-termed-as
I got this McQ in public service commission someone could help me.Fluid Mechanicshttp://www.aboutcivil.org/answers/3954/study-of-pressure-exerted-by-liquid-at-rest-is-termed-asMon, 01 Apr 2019 02:10:59 +0000Does a civil engineer use trig notations for polar coordinates?
http://www.aboutcivil.org/answers/3953/does-civil-engineer-use-trig-notations-for-polar-coordinates
I am currently going for my pre-engineering degree and some of the stuff in my classes, I have been told are not used in the field. Is that true?Civil Engineeringhttp://www.aboutcivil.org/answers/3953/does-civil-engineer-use-trig-notations-for-polar-coordinatesSat, 30 Mar 2019 21:40:11 +0000Answered: what is preliminary survey?
http://www.aboutcivil.org/answers/908/what-is-preliminary-survey?show=3951#a3951
<h2>Definition</h2><p style="text-align:justify">Preliminary site assessments are undertaken to determine the most suitable land-use in terms of development and planning, or for construction purposes. This exercise is not only suited for large corporate projects, but also beneficial for individuals, especially those engaged in construction projects in urban areas where pressures on land are great. Furthermore, its best practice to include a section of environmental impact assessment of the proposed project when carrying out this exercise.</p><h2 style="text-align:justify">Preliminary survey</h2><p style="text-align:justify">To collect adequate data to prepare plan / map of area to be used for planning and design.</p><p style="text-align:justify">In this step the alternative routes which are proposed after a rough survey in the second step are surveyed in details using some advanced instruments like levels, chain and theodolite. Aerial Photogrammetry is best suited for this type of survey. </p><h2 style="text-align: justify;">Types of Preliminary Survey</h2><h3 style="text-align: justify;">1. Control Surveys:</h3><p style="text-align:justify">Control surveys are used to establish horizontal and vertical coordinates for each point of interest.</p><h3 style="text-align: justify;">2. Aerial Surveys:</h3><p style="text-align:justify">A rural or urban mapping scale for the project is determined during the survey meeting. This scale directly affects the altitude of the photography and the flight line target intervals.</p><h3 style="text-align: justify;">3. Planimetric and Topographic Surveys</h3><p style="text-align:justify">Planimetric and topographic surveys collect measurements of natural and man-made features. Every surveying observation can be used to determine horizontal and vertical coordinates. However, when some of the features are mapped the vertical component is not utilized. Additionally, not all features are graphically represented in the project mapping files.</p>Surveying & Levellinghttp://www.aboutcivil.org/answers/908/what-is-preliminary-survey?show=3951#a3951Fri, 06 Apr 2018 15:54:43 +0000how much yield strength and ultimate strength of 40 grade and 60 grade?
http://www.aboutcivil.org/answers/3950/how-much-yield-strength-and-ultimate-strength-grade-and-grade
how much yield strength and ultimate strength of 40 grade and 60 grade?Civil Engineeringhttp://www.aboutcivil.org/answers/3950/how-much-yield-strength-and-ultimate-strength-grade-and-gradeTue, 03 Apr 2018 11:31:51 +0000calculating the water content
http://www.aboutcivil.org/answers/3948/calculating-the-water-content
From 750 kg mortar mix(200kg cement,485kg 0.5mm crushed sand, 65kg dune sand) at 0.4 wc ratio,<br />
how to calculate the water for 10kg of mortar mix at 0.4 wc ratioCivil Engineeringhttp://www.aboutcivil.org/answers/3948/calculating-the-water-contentMon, 13 Nov 2017 06:41:34 +0000Effect of carbonation of concrete is
http://www.aboutcivil.org/answers/3939/effect-of-carbonation-of-concrete-is
Effect of carbonation of concrete isConcrete Technologyhttp://www.aboutcivil.org/answers/3939/effect-of-carbonation-of-concrete-isWed, 08 Nov 2017 03:56:40 +0000Which specialisation is better- Ms in geographic information science and technology OR MS in building construction and facility management or
http://www.aboutcivil.org/answers/3932/specialisation-information-technology-construction-management
For my masters degreeCivil Engineeringhttp://www.aboutcivil.org/answers/3932/specialisation-information-technology-construction-managementSat, 28 Oct 2017 20:41:27 +0000Using given forces to analytically tell if a building will collapse?
http://www.aboutcivil.org/answers/3931/using-given-forces-analytically-tell-building-will-collapse
If we were given forces such as rain snow wind and self weight will the building collapse if we summed all these forces? What if the circumstance was changed and with all the forces, the door was opened and the force of wind was relieved.Structural Engineeringhttp://www.aboutcivil.org/answers/3931/using-given-forces-analytically-tell-building-will-collapseWed, 25 Oct 2017 15:36:56 +0000Define Frame?list any two types of frames
http://www.aboutcivil.org/answers/3930/define-frame-list-any-two-types-of-frames
frames and two types of framesStrength of Materialshttp://www.aboutcivil.org/answers/3930/define-frame-list-any-two-types-of-framesTue, 24 Oct 2017 13:07:11 +0000zone a and b in road cross section
http://www.aboutcivil.org/answers/3926/zone-a-and-b-in-road-cross-section
plz define the zone A,B and C in road x-section .Highway Design & Maintenancehttp://www.aboutcivil.org/answers/3926/zone-a-and-b-in-road-cross-sectionTue, 17 Oct 2017 15:05:57 +0000design step for abutment pier
http://www.aboutcivil.org/answers/3924/design-step-for-abutment-pier
Abutment and pier design for bridgeStructural Engineeringhttp://www.aboutcivil.org/answers/3924/design-step-for-abutment-pierFri, 13 Oct 2017 09:44:44 +0000describe the factors affecting the initial setting time of cement
http://www.aboutcivil.org/answers/3922/describe-the-factors-affecting-initial-setting-time-cement
describe the factors affecting the initial setting time of cementEngg. Materialshttp://www.aboutcivil.org/answers/3922/describe-the-factors-affecting-initial-setting-time-cementThu, 12 Oct 2017 21:03:37 +0000what are the type of informal reports ?
http://www.aboutcivil.org/answers/3913/what-are-the-type-of-informal-reports
Technical report writing TodayProject Planning & Mgmt.http://www.aboutcivil.org/answers/3913/what-are-the-type-of-informal-reportsTue, 26 Sep 2017 05:21:57 +0000super passage design
http://www.aboutcivil.org/answers/3904/super-passage-design
discharge required =295m^3Civil Engineeringhttp://www.aboutcivil.org/answers/3904/super-passage-designMon, 18 Sep 2017 17:01:17 +0000How to design a floor consists both one way and two way slab panels?
http://www.aboutcivil.org/answers/3893/how-design-floor-consists-both-one-way-and-two-way-slab-panels
A floor consists both two way slab panels and one way slab panels.If the design is to be carried out according to BS 8110,how to decide the continuity of an internal two way panel?should it be considered as one edge discontinues panel or an interior panel? Does a two way panel adjacent to a one way panel in one way panel's shorter direction transfer a moment?Structural Engineeringhttp://www.aboutcivil.org/answers/3893/how-design-floor-consists-both-one-way-and-two-way-slab-panelsSun, 10 Sep 2017 06:14:50 +0000Answered: What happens when we increase the cover in a design of beam
http://www.aboutcivil.org/answers/3885/what-happens-when-we-increase-the-cover-in-a-design-of-beam?show=3892#a3892
The more you will provide cover it will give positive benefit but follow is code for maximum and minimum cover for beamReinforced Concretehttp://www.aboutcivil.org/answers/3885/what-happens-when-we-increase-the-cover-in-a-design-of-beam?show=3892#a3892Sat, 09 Sep 2017 13:55:29 +0000Answered: how many bags of cement required for 1cum of M5 concrete
http://www.aboutcivil.org/answers/2095/how-many-bags-of-cement-required-for-1cum-of-m5-concrete?show=3891#a3891
I think approx 29 bag....Concrete Technologyhttp://www.aboutcivil.org/answers/2095/how-many-bags-of-cement-required-for-1cum-of-m5-concrete?show=3891#a3891Sat, 09 Sep 2017 13:46:10 +0000need help fot calculate deflection
http://www.aboutcivil.org/answers/3887/need-help-fot-calculate-deflection
hi guys <br />
i want to determine deflection of 2d shape that is a bent pipe , like triangle , that the BOTH ends of its are fixed , and a force applied on his head , Perpendicular on the plate of triangle , i want to calcualte deflection the head by formula .<br />
please help me . <br />
ty.Strength of Materialshttp://www.aboutcivil.org/answers/3887/need-help-fot-calculate-deflectionWed, 06 Sep 2017 10:08:41 +0000I have a plan for a residential building with plan size 25' x 30'. Can anyone help me to find out the minimum distance for columns and the minimum span for beams??
http://www.aboutcivil.org/answers/3881/residential-building-anyone-minimum-distance-columns-minimum
Please provide..Structural Engineeringhttp://www.aboutcivil.org/answers/3881/residential-building-anyone-minimum-distance-columns-minimumMon, 28 Aug 2017 17:39:43 +0000Answered: why in the bridge pier design is circular
http://www.aboutcivil.org/answers/2020/why-in-the-bridge-pier-design-is-circular?show=3877#a3877
so that wind pressure or water pressure can be reduse.Bridge Engineeringhttp://www.aboutcivil.org/answers/2020/why-in-the-bridge-pier-design-is-circular?show=3877#a3877Tue, 22 Aug 2017 17:55:50 +0000A overhanginging beam( equal overhang on both side(a) ) is subjected to udl over its entire length(L). to get equal bending moment at support and at mid span, what should be the overhanging length with respect to L (i.e. xL, what is the value of x)
http://www.aboutcivil.org/answers/3875/overhanginging-overhang-subjected-support-overhanging-respect
both side equal overhang ( a)<br />
length L ( including overhang)<br />
distance between support = (L-2a)Strength of Materialshttp://www.aboutcivil.org/answers/3875/overhanginging-overhang-subjected-support-overhanging-respectWed, 16 Aug 2017 08:20:06 +0000I just want to ask if How much land is needed for a 4000 seating capacity gymnasium?
http://www.aboutcivil.org/answers/3874/just-want-much-land-needed-4000-seating-capacity-gymnasium
Please answer my question its a big help for our feasibility study. Thank you!Civil Jobshttp://www.aboutcivil.org/answers/3874/just-want-much-land-needed-4000-seating-capacity-gymnasiumWed, 16 Aug 2017 06:52:07 +0000can any body tell me.... .How to calculate R.L of formation by using downward or upward gradient and R. L of ground for road work estimation
http://www.aboutcivil.org/answers/3873/calculate-formation-downward-gradient-ground-estimation
Earthwork estimation on roads having a problem related to r.l of formation and here by using this r.l of formation depth or height was calculated I didn't understand what is calcution is behind on that..... So any one please help meSurveying & Levellinghttp://www.aboutcivil.org/answers/3873/calculate-formation-downward-gradient-ground-estimationMon, 14 Aug 2017 05:57:38 +0000Volumetric stain is change in volume divided by original volume. There must be some volumetric strain when we blow balloon. But if we take Poisson ratio as 0.5 then it comes to be zero by using formula. How it is possible?
http://www.aboutcivil.org/answers/3856/volumetric-original-volumetric-balloon-formula-possible
Using formula of volumetric strain as a sum of linear strains in three directions.Civil Engineeringhttp://www.aboutcivil.org/answers/3856/volumetric-original-volumetric-balloon-formula-possibleFri, 28 Jul 2017 13:15:06 +0000structurally in which direction is preferable to load beams, short or tall edge of the column ?
http://www.aboutcivil.org/answers/3844/structurally-which-direction-preferable-beams-short-column
i am designing a three storey building and i want to know in which angle to distribute columnStructural Engineeringhttp://www.aboutcivil.org/answers/3844/structurally-which-direction-preferable-beams-short-columnTue, 11 Jul 2017 19:02:26 +0000High Moisture on floor
http://www.aboutcivil.org/answers/3843/high-moisture-on-floor
Hi,<br />
<br />
I have a godown which was used for urea storage for few years. this godown was not plastered and its floor was also of bricks laid down on soil.<br />
when it was not in use for urea storage anymore, we have plastered its walls and for floor we have used concrete and then plaster of cement around 8 years back.<br />
<br />
Now problem is that too much moisture remains on floor throughout the year except summer. Moisture quantity is so much like somebody has watered the floor.<br />
<br />
We have other rooms in the vicinity of this godown and there is not such problem.<br />
<br />
Please tell me why it’s so and what can be the permanent solution for it.Civil Engineeringhttp://www.aboutcivil.org/answers/3843/high-moisture-on-floorTue, 11 Jul 2017 06:45:17 +0000how to read a contour map
http://www.aboutcivil.org/answers/3840/how-to-read-a-contour-map
want to locate a buildingCivil Engineeringhttp://www.aboutcivil.org/answers/3840/how-to-read-a-contour-mapThu, 29 Jun 2017 12:13:19 +0000How to find the equation of parabolic strand in a post tensioning beam
http://www.aboutcivil.org/answers/3839/how-find-the-equation-parabolic-strand-post-tensioning-beam
The only thing given are the height at Anchorage and that at mid span and the length of the beamSteel Structureshttp://www.aboutcivil.org/answers/3839/how-find-the-equation-parabolic-strand-post-tensioning-beamWed, 28 Jun 2017 10:08:24 +0000How to find the length of a post tensioning parabolic strand if we just know the length and height of parabolic curve from one end to other?
http://www.aboutcivil.org/answers/3838/length-tensioning-parabolic-strand-length-height-parabolic
Can we find the length of parabolic prestressing duct in a girder if all we know is the height of the duct and the length of girderSteel Structureshttp://www.aboutcivil.org/answers/3838/length-tensioning-parabolic-strand-length-height-parabolicWed, 28 Jun 2017 08:35:07 +0000Can on sloped ground with 1.00 m to 2.5 m in a distance 35 m bottom of# isolated and partly combined bottom with designed depth at difference levels?or should be one level by increasing depth at higher end,or averaging?
http://www.aboutcivil.org/answers/3834/distance-combined-designed-difference-increasing-averaging
Dear sir,<br />
There is sloped ground with 1 to 1.2m difference in level .The designed foundation depth is 2.5 m .can I place bottom of isolated footing and partly combined fitting at different levels as per design depth,or they have to at one level by taking average GL or by consider depth design at lower level by increasing at higher end<br />
Regards <br />
K S Rao<br />
9437493945&#Building Constructionhttp://www.aboutcivil.org/answers/3834/distance-combined-designed-difference-increasing-averagingFri, 16 Jun 2017 13:36:40 +0000Difference between simple manometer and differential manometer?
http://www.aboutcivil.org/answers/3833/difference-between-simple-manometer-differential-manometer
Please give me this answer point wiseCivil Engineeringhttp://www.aboutcivil.org/answers/3833/difference-between-simple-manometer-differential-manometerMon, 29 May 2017 13:55:04 +0000difference of transit rule and bowditch rue
http://www.aboutcivil.org/answers/3832/difference-of-transit-rule-and-bowditch-rue
surveying traverse ruleCivil Engineeringhttp://www.aboutcivil.org/answers/3832/difference-of-transit-rule-and-bowditch-rueSat, 20 May 2017 06:41:45 +0000Theodolite calculations
http://www.aboutcivil.org/answers/3831/theodolite-calculations
A theodolite has a multiplying constant of 100 and when set up at position A has a height of 1.20m. When sighted onto a vertically held levelling staff at position B, the horizontal centre line gives a reading of 1.40m and the upper and lower stadia lines read 2.00m and 0.80m respectivelly. If the angle of elevation of the instrument is 6°20'. , calculate the horizontal distance?Civil Engineeringhttp://www.aboutcivil.org/answers/3831/theodolite-calculationsThu, 18 May 2017 17:22:58 +0000