Located at the intakes from river, lakes & reservoirs for water treatment plant or at wet well into which main trunk sewer discharge for waste water treatment plant. They are also located before the pumps in storm water & waste water pumping plant. In case of industrial waste water treatment there is usually no need of such equipment. These devises remove the coarse

The following steps should be taken that are necessary to be taken for detail design of proposed landfill site & development of treatment process concerning to site preparation: Preparing site for proper drainage of rain water by cutting of high level ground and giving it a down slope 1:400. Soil obtained from this cutting is used in providing the embankment of fencing of

Combination of two or more simple circular curves of different radius having their curvature in the same direction. Essentially, a compound curve consists of two curves that are joined at a point of tangency and are located on the same side of a common tangent. Though their radii are in the same direction, they are of different values. This is the process of establishing

Primary aim of strengthening a structure is to increase its load bearing capacity with respect to its previous condition. Only those aspects related to flexure are discussed here. Established techniques which have been in use successfully for a number of years are recognized as follows: Over Slabbing Sprayed Concrete with Additional Reinforcement Steel Plate bonding External Prestressing

Sand trap is a structure that is constructed to exclude the quantity of sand that is carried by water flowing in the channels or tunnels for power generation or irrigation or some other purposes. Sand trap is provided In the form of chambers that depends upon the discharge that is to be carried by the channel or tunnel. As it is general and true believe the life of dam